The house foundation- forms

I have to apologize I did not take any pictures of the actual construction of the pier forms but I can tell you that I used 1/2″ plywood and 2×3’s to reinforce the corners.

IMG_3797

My Father and Brother came over to help me the day the concrete was being poured.

IMG_3787

We used the site level transit again to check the height of the boxes to make sure all was level since they were built at a different location and then brought to the site. I have to say I got lucky they were all within 1/4′ of each other. I used orange spray paint to mark the differences on the forms.IMG_3785

I wound up needing 9 yards of concrete in total. The truck showed up right on time and we got to work.

IMG_3812 IMG_3822 IMG_3818

IMG_3815 IMG_3823 IMG_3856

Because of the way the land was sloped the truck chute was almost level on the taller boxes and we had to get creative and push the concrete along with a shovel.

IMG_3838 IMG_3843 IMG_3839

As I said in one of the earlier posts my way is probably not the right way, and some of you with experience in this area probably said to yourself those boxes won’t hold. Well surprisingly all did but 2 of them I didn’t reinforce the corners well enough and the box came apart but we were able to salvage them and continue.

IMG_3859 IMG_3857 IMG_3858 IMG_3861

We used a vibrator to settle the concrete and get all the air voids out which is what led to the 2 blowouts but it needs to be done.

IMG_3849 IMG_3852 IMG_3854

It took us and a very patient driver about 2 hours to do all the boxes but it was done and I was extremely relieved that it went as well as it did.

IMG_3875  IMG_3891 IMG_3886

 

Leave a Reply

Your email address will not be published. Required fields are marked *

Subscribe To Our Newsletter

 

Join our mailing list to receive the latest news and updates from our blog.

You have Successfully Subscribed!

Pin It on Pinterest

Share This